Read from Magtek card swipe reader in HID mode using libusb-win - Hallo sahabat Dev-Create, Pada Artikel yang anda baca kali ini dengan judul Read from Magtek card swipe reader in HID mode using libusb-win, kami telah mempersiapkan artikel ini dengan baik untuk anda baca dan ambil informasi didalamnya. mudah-mudahan isi postingan Artikel libusb, Artikel libusb-win, Artikel magtek, Artikel usb hid, Artikel Windows 7, yang kami tulis ini dapat anda pahami. baiklah, selamat membaca.

Judul : Read from Magtek card swipe reader in HID mode using libusb-win
link : Read from Magtek card swipe reader in HID mode using libusb-win

Read from Magtek card swipe reader in HID mode using libusb-win

This post deals with reading card swipe information from a Magtek USB Swipe Reader when set in HID mode. I used Visual Studio C++ Express Edition for a windows development environment. I installed libusb-win32 from http://www.libusb.org/wiki/libusb-win32
Create a C++ project in Visual studio, include the usb.h file and link the project with libusb.lib. Both of these are included in the libusb package.

The following can be used to read the card information-

// magtekusbhidcardswipe.cpp : Defines the entry point for the console application.
//
#include
#include

#include "stdafx.h"
#include "usb.h"

int _tmain(int argc, _TCHAR* argv[])
{
    struct usb_bus *busses;
    struct usb_bus *bus;
    struct usb_device *dev;
    int c, i, res;
    char data[337];
    char idata[10];

    usb_init();
    usb_find_busses();
    usb_find_devices();
    busses = usb_get_busses();
    for (bus = busses; bus; bus = bus->next) {

        for (dev = bus->devices; dev; dev = dev->next) {           
        if(dev->descriptor.idProduct == 2 && dev->descriptor.idVendor == 0x801) {
        printf("Product id: %04hx" ,dev->descriptor.idProduct);
        printf("Vendor id: %04hx \n" ,dev->descriptor.idVendor);
               
        usb_dev_handle *l_Handle = usb_open( dev);
        if( NULL == l_Handle ){
            printf( "usb_open(): no handle to device\n" );
        }
        res = usb_claim_interface(l_Handle, 0);
        if(res  < -EBUSY) {
            printf("Device interface not available to be claimed! \n");
            exit(0);
        }
        if(res < -ENOMEM) {
            printf("Insufficient Memory! \n");
            exit(0);
        }
        printf( "\nPlease swipe your card\n",res );
       
        res = usb_interrupt_read(l_Handle, 0x81, data, 337, -1);
        printf( "\nusb_interrupt_read %d \n",res ); 
       
        c=-1;
                //I am interested in only 10 characters in this range
        for(i=1;i<10;i++) {
            idata[++c] = data[i];
        }
        c=atoi(idata);
        printf( "\nMy data : %d\n",c);
       
        usb_release_interface(l_Handle, 0);            
        usb_close(l_Handle);
        }
       }
    }
    getchar();
    return 0;
}
 

Suggestions/improvements are welcome as always.

Demikianlah Artikel Read from Magtek card swipe reader in HID mode using libusb-win

Sekianlah artikel Read from Magtek card swipe reader in HID mode using libusb-win kali ini, mudah-mudahan bisa memberi manfaat untuk anda semua. baiklah, sampai jumpa di postingan artikel lainnya.

Anda sekarang membaca artikel Read from Magtek card swipe reader in HID mode using libusb-win dengan alamat link https://dev-create.blogspot.com/2011/02/read-from-magtek-card-swipe-reader-in.html